This is a cylindrical twist lock case for the ESPixelStick V3. It’s meant to be zip tied directly to your elements/props or attached via one of the optional mounts. The ESPixelStick slides snugly into the base. The cover has a slot for optional mounting plates or a zip tie through the holes by the mounting slot.

Dimensions:

Length: 40mm

Width: 44.3mm

Height: 87mm

Bases

• Standard Base - Dual PG7 Glands
  • Has threads for two PG7 glands which are sized appropriately for the typical pigtails and power connections used in holiday lighting displays
• Standard Base - Single PG7 Glands
  • Threaded for a single PG7 gland
  • Useful for when power is back-fed from the element and a power connection isn't needed
• Standard Base - Single PG9 Glands
  • Threaded for a single PG9 gland
  • Useful for when power is back-fed from the element and a power connection isn't needed
• Blank Base
  • Blank base for user modification
  • Has no holes for wires

Mounting Plates (Optional)

Mounting plates are provided if you prefer to use something other than a zip tie. The mount is a simple 20x20x2mm design. A blank is provided for creating custom mounts.

• 1/2" PVC Clip
  • A 1/2" PVC clip for mounting on horizontal or vertical runs of PVC
• Center Screw Mount
  • Sized for mounting with a #8 screw
• Blank Plate
  • A blank for modifications or adding to an existing model

This product is being sold and manufactured with the written consent of the original owner (Forkineye Electronics).